30-day energy-saving plan

A 30-day energy plan beats random tips by sequencing wins: measure, cut standby, fix heat leaks, then tackle bigger habits. Without a sequence, you change nothing and blame the bill.

This preview outlines the four weeks. Club unlocks daily checklists, printable logs, and apartment-specific variants.

Week 1 — Measure

Read meters, list always-on devices, and note thermostat behavior. Photo the breaker panel labels if they’re mysteries. You can’t improve fog.

• Pick one baseline week and don’t change habits yet.
• Write down comfort complaints (cold room, stuffy night).
• Flag any safety issues for pros.

Week 2 — Quick cuts

Standby strips, LED swaps in high-use rooms, fridge temperature check, and a draft pass on the worst door.

Weeks 3–4 — Habits and verify

Thermostat schedule, shorter showers if water-heated by electricity/gas that shows up on bills, and a second meter read. Celebrate measured drops, not perfection.

Share the plan

If you live with others, pick one shared goal for the month — standby strip or thermostat schedule — so the plan isn’t a solo spreadsheet nobody follows.

How the 30 days are grouped

Week one is free wins: bulbs, strips, and habits you can finish in under ten minutes. Week two targets water and heat leaks. Week three is appliance behavior — dishwasher, laundry, cooking. Week four locks in measurement so the savings stick after the challenge ends.

• Days 1–7: lighting, standby, and “off means off.”
• Days 8–14: drafts, water heat, and thermostat discipline.
• Days 15–21: laundry, cooking, and fridge efficiency.
• Days 22–30: metering, bill review, and a keep/kill list of habits.

Members unlock the day-by-day calendar with exact actions, a printable tracker, and the “skip without guilt” rules for travel days so you don’t abandon the plan after one miss.

Thirty small actions beat one dramatic weekend you never schedule.

Club members get the full 30-day calendar, room-by-room tasks, and troubleshooting when numbers don’t move. Subscribe to unlock the complete plan.

How the 30 days are structured

Week one finds leaks and standby loads. Week two tackles lighting and water heat. Week three focuses on comfort setpoints and drafts. Week four locks habits and measures. Each day is one action you can finish without a project weekend.

• No day requires buying expensive gear to start.
• Optional upgrades appear only after the free wins.
• A simple scorecard tracks what you finished.

The full day-by-day calendar is for members — join free to unlock it.